Virtual Private Network Server

Virtual Private Network (VPN) Server:
-------------------
-VPN : Is the highest secure of the LAN network system for client or networks remote.

-VPN : There are 2 type:

a.User to Network : It is the coporate Intranet from client to network.
b.Network to Network : It is the coporate Internet from network to network.

-------------------
1- VPN Server:
(Have 2 Network Interface Cards:)
1-LAN:192.168.168.168
2-WAN:192.168.20.19

=>Start - programs - Administrative tools - Routing and Remote Access
=>R-Click (Local Host Name)- Configure and Enable Routing and Remote Access - next
 .Virtual Private Network (VPN) access and NAT - next - Private Network(LAN)
-Next- From a specified range of addresses - New - (set DHCP for VPN Client)
=> 192.168.168.1 => 192.168.168.20
-Next - finish - ok


-------------------
2- Create user account in AD :

=> Start - Administrative Tools - Active Directory User & Computers
-create new user whatever you want, example:

username: vpn1
passwords:123

username: vpn2
passwords:123
=> Properties (vpn1 & vpn2) - Dial-in - Network Access Permission (Allow access) - ok

-------------------
3- Testing VPN Client (Stand on the internet) to remote VPN Server:

=>Start - run - ncpa.cpl - Creat a new connection - Next
  - connect - Connect to the network at my workplace
  - Virtual Private Network Connection - Next - Company Name (VPN client)
  - Host name or IP address (192.168.168.168) - My use only - Tick(add a short..)
  - Finish - User name: xxxx - password: xxxx - Tick (Save this user ...)



VPN need 2 NIC
Lan 192.168.1.1
Wan 203.1.2.3


Lan 10.0.0.1
WAN 192.168.1.253

ping 10.0.0.2 local pc ip